From HUAINAN PANJI COAL PREPARATION PLANT TO THE CONSTRUCTION SITE OF THE FOUNDATION PIT SUPPORTING ENGINEERING OF THE UNDERGROUND CORRIDOR OF the power PLANT, Shanghai STRONG management personnel are INSPECTING the steel support of the FOUNDATION pit to ensure no deformation and no noise, so as to ensure the construction quality. The 2X660MW ultra-supercritical Coal-fired Unit Project of Panji Power Plant Phase I of Huainan Mining Group (hereinafter referred to as the "Project") is located in Wangwei Village and Huaibei Village, Jiahe Town, Panji District, Huainan City, Anhui Province, about 0.6km north of Fuhuai Railway.
Details >The concrete support of foundation pit supporting engineering of Nanke Business Center project is under construction. The project is located in the north of the South Ring Road and the east of the West Ring Road in the high-tech Zone of Yancheng City, Jiangsu Province, with a total investment of about 2 billion yuan and a total construction area of about 225,000 square meters. The foundation pit construction involves a variety of technologies, such as press-poured pile, three-axis mixing pile, stiffened pile, SMW construction method inserted steel, concrete support, etc., the enclosure pile has been completed recently.
Details >A group of steel supports at the site of Huzhou Inner Ring (Northern Line) Rapid Transformation Project No.2 (referred to as "Huzhou Inner Ring North Line Rapid Transformation Project") are being dismantled. Huzhou Inner Ring North rapid transformation project under the full length of the tunnel1244mIn total, nearly ten thousand tons of steel support should be installed. The project has a large amount of engineering and a long construction period (expected to be one year). At present, there are8The steel support of each plate (total required32Has completed the construction, among which1The concrete construction of each plate has been completed, and the steel support has been removed. Other plates are being built with a first layer of steel support.
Details >In the morning, on the site of Shanghai titanium based Waigaoqiao Steel support project, the general contractor, together with Party A of the project and Shanghai Strong foundation safety officer, conducted safety inspection on the site demolition and support area, and reminded the operators to strictly implement safety procedures and management to ensure the successful completion of the project.
Details >At noon, at the construction site of an IKEA furniture project in Hefei, workers are replacing the rope of a crane. During the construction of each project, the operator will regularly check the crane wire rope. If the wire rope is found to be broken and the amount of broken wire exceeds 10%, it needs to be replaced in time to ensure the stable operation of the crane.
Details >At six o 'clock in the morning, just before dawn, the team leader and the workers were holding a pre-class meeting on the IKEA project site in Hefei. In the meeting, they will summarize the previous day's work, discuss the problems encountered, and make arrangements for the day's work.
Details >Jobs with high requirements for accuracy often use a variety of instruments and equipment. In the field of foundation engineering, the theodolite and the level will appear on the site before the construction of each project begins. They will work with each other to accurately measure the pile body data throughout the construction process, keeping errors within permissible limits.
Details >A solid bamboo joint square pile has been completed, and the project management and supervision personnel have timely monitored and accepted it to ensure the accurate position of the pile. After the completion of each process can be timely acceptance to ensure that the whole project will not deviate from the course. Shanghai Strong Project staff like a well-trained team, in the project construction process can always be orderly, busy without chaos.
Details >In engineering projects, the operator must possess the spirit of "excellence". Otherwise, a miss is as good as a mile. Before construction, technical personnel and supervision should jointly review the pile position coordinates, repeatedly measure to ensure that the error is within the allowed range, and make good marks to check the accuracy of subsequent construction.
Details >Safety always comes first in engineering operations. In the construction process of a project, many procedures are set up to address safety issues, safety technology disclosure is one of them. Every morning, before the start of the day's work, the project management personnel will first disclose the safety technology to the operators to clarify the safety hazards and precautions in the construction process, so as to reduce the possibility of accidents in the construction process. Such, JOB PERSONNEL ABILITY IS ACCOMPLISHED IN CONSTRUCTION PROCESS ORDERLY, BE prepared FOR TROUBLE.
Details >