Focus on land, water foundation engineering comprehensive service providers
400-100-2850
强劲地基 品质工程 信誉至上
Home
> News > News and information > The foundation encyclopedia > Cast-in-place pile technology for pile foundation construction technology of strong foundation building
font: Big Middle Small

Cast-in-place pile technology for pile foundation construction technology of strong foundation building

The MUD wall protection hole filling pile is a pile that is replaced by underwater concrete pouring after the hole is formed by slowly drilling through the pile machine under the condition of mud wall protection, taking the drilling slag out with mud and protecting the hole wall from collapsing. No vibration, no compaction, low noise, suitable for use in urban built-up areas and other advantages, widely used in building pile foundation.

The MUD wall protection hole filling pile is a pile that is replaced by underwater concrete pouring after the hole is formed by slowly drilling through the pile machine under the condition of mud wall protection, taking the drilling slag out with mud and protecting the hole wall from collapsing. No vibration during construction, no compaction, low noise, suitable for use in urban built-up areas and other advantages, widely used inBuilding pile foundation.

Cast-in-place pile technology

Mud has the function of discharging slag and protecting wall. According to the mud circulation mode, it can be divided into two construction methods: positive circulation and reverse circulation.

The drilling process principle of positive circulation rotary drill is that mud or high-pressure water is poured into the hollow drill pipe and ejected from the bottom of the drill pipe, carrying the soil slag under drilling to flow upward along the hole wall, and the soil slag is brought out of the flow mud pool by the hole mouth. Positive cycle has the advantages of simple equipment, convenient operation and low cost. Suitable for small diameter holes(The diameter is less than800mm), but the slag discharge ability is weak.

Reverse circulation rotary drilling is a drilling method in which the drill pipe and the drill bit are driven by the rotary device of the drilling rig to turn and cut the broken rock and soil, and the circulating wall protection mud is pumped by pumping, air lift and jet, and the drilling slag is taken with the drill pipe to suction out of the hole. The flow speed of mud in reverse circulation process is high and it can carry a large amount of soil slag. Reverse circulation hole formation is an effective construction method for large diameter piles.

Shanghai Qiangqiang Foundation Engineering Co., LTD. 's business covers foundation pit engineering, pile foundation engineering, land and waterFoundation treatment, slope treatment and other engineering fields. Around" Excellent technology, reliable process", construction fast "technical requirements,Is to provide customers with land, water foundation engineering technical consultation, construction services and other comprehensive solutions of the entity enterprise.

contact Us

  • No. 289, Huixian Road, Jiading District, Shanghai
  • 400-100-2850
Business contact
    Mr. Ms.
  • Type of Project:
    Pile foundation engineering Foundation pit engineering Above water foundation treatment Land foundation treatment