Shanghai strong foundation strength composite pile construction drilling scheme: 1, cement soil mixing pile construction depth range, all the drill pipe using cross blade.
Details >1. The general survey control network submitted by the urban surveying and mapping department or unit cannot be directly used as the first level plane control network. The control network must be encrypted or auxiliary measures can be used.
Details >Large-diameter vibrating immersed tube crushed stone pile is a deep and large-diameter dense pile body composed of crushed stone formed by sinking the steel feed pipe into the design depth by using high-power vibrating hammer as the driving force, filling the gravel into the hopper and silo, and then pulling out the feed pipe through vibration. Compared with the traditional technology of gravel pile, Shanghai Qiangqiang has mature construction technology and experience, and has dozens of gravel pile construction equipment, which has been successfully used in many large-scale foundation treatment projects at home and abroad.
Details >The elevation of the steel cage and lattice column can be calculated by the elevation at the top of the mouth guard pipe. The design elevation of the pile top must be guaranteed when placed, and the allowable error is ±10mm. The lattice column and the steel cage must be welded firmly, and the vertical deviation is not more than 1/300.
Details >Concrete cast-in-place pile construction is an important part of construction, if its quality is not well controlled, it may occur hole collapse, diameter reduction, pile hole deflection and pile end can not meet the requirements of the designed bearing layer, but also directly affect the quality of the pile and cause the reduction of pile bearing capacity.
Details >Shanghai strong foundation underground diaphragm wall guide wall construction method: before the underground diaphragm wall into the trough, should be built guide wall. The guide wall is carefully constructed. The quality of the guide wall directly affects the edge and elevation of the underground continuous wall. It is an important measure to guide the trough equipment, store the mud to stabilize the liquid level, maintain the stability of the upper soil and prevent the soil from slumping.
Details >Construction preparation of Shanghai strong foundation punching cast-in-place pile: Punching cast-in-place pile is one kind of cast-in-place pile, which has little harmful effect on adjacent buildings and surrounding environment; Pile length and diameter can be changed freely according to design requirements; The pile tip can enter the bearing layer or embed in the rock layer; Single pile bearing capacity and other advantages, suitable for filling soil layer, clay layer, silt layer, silt layer, sand layer, gravel layer, gravel layer, karst rock or fracture development of the stratum construction.
Details >Shanghai Strong foundation diaphragm wall construction CSM technology, the pile length can reach more than 60 meters, milling wheel torque of 7.5T.m, can cut the uniaxial compressive strength of 20Mpa rock, wall thickness of 0.7m~1m, 2.8m width, has the advantages of strong formation adaptability, fast construction speed, high wall quality.
Details >Shanghai Strong foundation CSM construction pile machine can be used in the construction of weathered rock, the construction depth can reach more than 60m, has the advantages of strong formation adaptability, fast construction speed, high wall quality, especially suitable for use in complex strata.
Details >Shanghai STRONG foundation punching pile construction preparation work plan: Punching cast-in-place pile is by special punching drill into deeper holes, and then put into reinforced cage and underwater pouring concrete pile foundation, surrounded by reinforced concrete as a wall. It IS a DEEP FOUNDATION TYPE, suitable for high water table or silt geology, especially across rivers and other places, mainly under friction.
Details >