Focus on land, water foundation engineering comprehensive service providers
400-100-2850
Quality Engineering     Reputation First
Home
> News

News

28 Apr

Function and design requirements of foundation pit engineering

First, the function of foundation pit engineering, second, the design requirements of foundation pit engineering

Details >

26 Apr

Characteristics of foundation pit engineering

The characteristics of foundation pit engineering: 1, foundation pit engineering is a comprehensive discipline in geotechnical engineering, 2, temporary and risky, 3, the regional difference of foundation pit engineering, 4, the environmental conditions around the foundation pit strict requirements

Details >

24 Apr

Survey points of foundation pit engineering

Compared with the investigation of buildings, the investigation of foundation pit engineering has its own characteristics. With the excavation of the soil inside and outside the foundation pit, there will be stratum movement. Therefore, there are specific requirements for the scope and depth of investigation and geotechnical index test items.

Details >

22 Apr

Construction and monitoring of bolt

A, bolt construction points: 1, drilling, 2, set up reinforcement or steel strand bundle, 3, grouting, 4, prestress tension; Two, bolt monitoring:

Details >

20 Apr

Characteristics of reverse method in foundation pit engineering

The CHARACTERISTICS OF THE REVERSE METHOD IN FOUNDATION PIT ENGINEERING ARE AS FOLLOWS: 1. The FORWARD METHOD AND THE REVERSE METHOD; 2. The FOUNDATION PIT SUPPORTING STRUCTURE AND THE UNDERGROUND MAIN STRUCT-INTEGRATION; 3. Shorten THE WHOLE CONSTRUCTION PERIOD; 4

Details >

18 Apr

Construction flow of undisturbed earth taking and pressure pouring concrete pile with full protective cylinder

The construction of undisturbed soil taking concrete cast-in-place pile with full protective simplicity adopts dual-power drill with built-in spiral blades to drill down and cut the soil to form the pile diameter. At the same time, the undisturbed soil in the protective simplicity is removed, and the concrete is inserted into the steel cage after being pressed and the protective simplicity is removed to form reinforced concrete piles.

Details >

16 Apr

Protection measures for foundation pit

In order TO ensure the smooth construction of foundation pit engineering, the construction scheme should be formulated according to the relevant provisions of the design specification of foundation pit support, and the corresponding safety protection measures should be taken.

Details >

14 Apr

Process flow of SMW construction pile

The main construction steps of SMW construction pile (cement soil mixing pile) are as follows: 1. Construction preparation; 2. Two, stirring pile construction; Three, insert H steel; 4. Pull out the H-beam

Details >

12 Apr

Construction process of mud wall protection bored pile

Bored pile refers to the use of drilling machinery drilled out of the pile hole, and in the hole poured concrete (or first in the hole hanging steel cage) and into the pile.

Details >

10 Apr

Hazards of long exposure of foundation pit

Foundation pit exposed for a long time, will cause to a certain depth of foundation pit excavation, subsoil swell up phenomena will be shown after the release of the pressure, rainfall or row to pit water leads to a pit soil softening, the palisade structure of passive resistance is reduced, so that the pit displacement of retaining structures and cause around the settlement and deformation of foundation pit, endanger the safety of the surrounding buildings and structures.

Details >

Recommended news

contact Us

  • No. 289, Huixian Road, Jiading District, Shanghai
  • 400-100-2850
Business contact
    Mr. Ms.
  • Type of Project:
    Pile foundation engineering Foundation pit engineering Above water foundation treatment Land foundation treatment